Welcome to Unit Conversion for SansGUI


 
Generate/Title.jpg

Unit Conversion for SansGUI Version 1.1

Unit Conversion for SansGUI is a utility program for converting numerical values from one measuring unit to another. Based on IEEE/ASTM SI 10-1997 Standard, this program covers most of the SI units and many other non-SI units. It has the following features:

Go to the Introduction section of this manual.

Version 1.1 Release Notes

The primary differences between Unit Conversion for SansGUI version 1.1 and 1.0 are:

System Requirements

This program requires the SansGUI Run-Time Environment version 1.1 or later. The free demonstration version of SansGUI (SGdemo, available from ProtoDesign's web site) can be used with all the features described above. With the SGdemo edition, however, you cannot save the data for later access. The SansGUI Professional Edition is NOT required even if you want to write the "plug-in" routines to populate the data array and matrix. Please check the Getting Started guide of the SansGUI manuals for the system requirements of the SansGUI Run-Time Environment.

Installation Procedures

Before installing Unit Conversion for SansGUI version 1.1, you need to have the SansGUI Run-Time Environment installed on your computer. The Unit Conversion utility program is distributed in a self-extracting archive executable file in the SansGUI software distribution CD and from ProtoDesign's web site. To install it, simply run the executable file and follow the instructions. An important note is that the files should be installed into the SansGUI directory structure. That is, during the installation process, it will ask you where to install Unit Conversion for SansGUI in an Unzip to folder: field. You need to indicate where your SansGUI installation directory is. If the shown directory matches the one you chose when you installed SansGUI, you can simply use the default value here; otherwise, click on the Browse... button to locate the SansGUI installation directory. The SansGUI installation directory is the one containing SansGUI Release.txt and License.txt files.

Unit Conversion for SansGUI Files

File

Description

lib\Unit_1_1.sgo

Unit Conversion for SansGUI Object Library

sim\Unit_1_1.dll

Main DLL for data column copying in table objects

doc\Unit\*.*

On-line documentation files

doc\Unit\Generate\*.*

Picture files for on-line documentation

samples\Unit\UnitConv.sgp

Main Project Model file for Unit Conversion, load this file into SansGUI to start using the Unit Conversion utility program.

samples\Unit\Matrix_C\*.*

An example project to demonstrate how to write user overriding routines to populate a Matrix in MSVC++.

samples\Unit\Matrix_F\*.*

An example project to demonstrate how to write user overriding routines to populate a Matrix in CVF.

samples\Unit\Table_C\*.*

An example project to demonstrate how to write user overriding routines to populate a Table in MSVC++.

samples\Unit\Table_F\*.*

An example project to demonstrate how to write user overriding routines to populate a Table in CVF.

Getting Started

Please go to the next section, titled Introduction, of this manual.

Technical Support

For technical assistance on SansGUI, please contact:

mailto:support@protodesign-inc.com

http://sansgui.com/support.htm or

http://protodesign-inc.com/support.htm

Phone: (630) 759-9930

Fax: (630)759-4759

Copyright and License

Copyright © 2001-2003 ProtoDesign, Inc. All rights reserved.

The Unit Conversion for SansGUI utility program and its documentation are copyrighted by ProtoDesign, Inc. and are provided "AS-IS" without warranty of any kind, express or implied. Neither ProtoDesign, Inc. nor its distributors will be held liable for any damage caused or alleged to be caused either directly or indirectly by this software. Redistribution of the utility program in its original form without modification is permitted.

The SansGUI Software and its documentation, on-line and printed, are copyrighted by ProtoDesign, Inc. The use of these materials are restricted by the license agreement accepted by the user during the software installation process.

Trademarks

SansGUI and its logo is a registered trademark and ProtoDesign and its logo is a registered service mark of ProtoDesign, Inc. Microsoft Windows is a registered trademark of Microsoft Corporation. All other trademarks are owned by the respective companies.

 



Introduction

Unit Conversion for SansGUI Version 1.1

Copyright © 2001-2003 ProtoDesign, Inc. All rights reserved.

http://protodesign-inc.com